KA Brick Mortar Repointing Repair Solution - 25kg

Name: KA Brick Mortar Repointing Repair Solution - 25kg
Brand: KA Building Products
SKU: KEN003
Availability: Discontinued

Code:

KEN003

Brand:

KA Building Products

This item is out of stock and not available to purchase.

View alternative products

View full product details

View questions about this product

Create a wishlist

Paull Snowden

Description

Re-Pointing
• Replaces fatigued pointing on masonry and blockwork.
• Can be used on open joints.
• Expands when applied to create a watertight seal.

Recommended use
To replace and repair damaged and weakened pointing in stonework.

Special Features
Acts with water and free lime present in the substrate to react with the active chemicals in the product quickly forming and developing
a continuous barrier of insoluble crystals which penetrate deep into the joint structure of concrete, blocking capillaries
and leaks from the further passage of water, whilst permitting the transmission of air and water vapour, enabling the structure to
breathe. Once the structure is re-pointed, the active chemicals remain dormant until any subsequent contact with water reactivates
the sealing process.

Rate and Penetration
Rate and penetration of crystalline development varies with the density and surface absorption of the concrete. Sufficient surface
penetration will provide full waterproofing properties after 5 – 7 days.

Advantages
Active ingredients will not delaminate, peel off or wear away. The permanent waterproofing properties become an integral part
of the structure, protecting reinforced concrete from water borne corrosive elements.

Highly Concentrated
Non-toxic or tainting blend of moisture activated chemicals, high grade silica aggregates and selected chemicals.

Dilution Instructions
Add 4ltrs of clean water to 25kg of Re-point.

Product Compatibility
No known hazards or incompatibility with other substances.

Service Temperature Range
Avoid extremely hot and cold weather below 5 degrees C.

Material Description
Composition Type
Specially prepared quartz, Portland cement and a blend of organic and inorganic chemicals.

Contains
Cementitious based powders containing mineral fillers (silicatious fillers) and small amounts of flow/shrinkage compensating
additives.

Appearance
Grey Powder.

Smell
Cement.

Storage
Product must be protected from dampness or water. Store as for cement. Secure in cool well-ventilated storage in closed containers
according to manufacturers recommendations. Check packaging periodically to ensure proper sealing.

Shelf Life
12 Months in good, dry, frost free conditions

Safety
Irritant chemical. Always maintain a well – ventilated working environment whilst handling and during mixing and application.

Fire Properties
Non – flammable powder

Handling
Product is mildly caustic. Will degrease skin causing dryness and possible irritation. Careful handling recommended. Operatives
must wear safety glasses and gloves and suitable protective clothing.

Spillage
Avoid spillage. Sweep up powder and place in plastic bags for disposal to authorised site.

Minor Spillage
Rinse with water.

Disposal
Dispose of waste in accordance with Local Authority procedures.

Health and Safety
Warning! Keep out of reach of minors. Always ensure that labelling is readable and follow the manufacturers recommendation.
Emergency Procedure – First Aid

Skin/Eye Contact
Dust off spillage on skin and wash well with soap and water. Wash eyes at once with cold clean water for 10 – 15 minutes.
Seek medical advice if irritation persists.

Inhalation
Take care when handling to minimise dust. Ensure adequate ventilation. Move to fresh air.

Ingestion
In case of accidental ingestion do not induce vomiting. Give water to drink and seek medical attention

Specification

There are no product specifications to show.

Downloads

There are no product downloads to show.

Questions & Answers

There are currently no questions for this product.

Product Enquiry Form