Order Helpline 01752 692 221
Order Helpline 01752 692 221

Fibreglass Drip Fascia Charcoal Trim (A200) - 3m Length

Code:
A200
Brand:

Girth (the visible part of the trim) - 90mm. Depth (the fixing arm back onto the roof) -90mm. These trims are fitted to the roof edge allowing drainage into the gutter. Compatible with C1 corner Fitting Instructions Two support battens should be fixed to the pe...Read More

Create a wishlist

"Happy with purchase and service"

David Ewington

Description

Girth (the visible part of the trim) - 90mm.

Depth (the fixing arm back onto the roof) -90mm.

These trims are fitted to the roof edge allowing drainage into the gutter.

Compatible with C1 corner

Fitting Instructions

  • Two support battens should be fixed to the perimeter of the roof to provide space for the gutter to fit behind the trim, with the outer batten attached 10mm lower than the inner batten to allow the trim to sit flush with the roof.
  • Apply trim adhesive to the batten in 30mm beads at 300mm centres, rub the trim into place and nail to the decking. Do not nail through the front of the trim. If the pitch of the roof is only minimal, rainwater is likely to hold behind the trim. A planning machine can be used to take 2mm off the deck to allow the trim to lay flush with the board.

Dimensions

Length 90mm Depth 3000mm Width 90mm

Downloads

There are no product downloads to show.

Questions & Answers

There are currently no questions for this product.

loading...

Product Enquiry Form

Fibreglass Drip Fascia Charcoal Trim (A200) - 3m Length

*Required Field