Pinkgrip will just about anything on a building site that needs sticking. It's amazing grabbing strength not only removes the need to pin under the workpiece to prevent slumping, but its revolutionary initial direct bond eliminates the need for double stick methods. Pinkgrip c...Read More
Pinkgrip will just about anything on a building site that needs sticking. It's amazing grabbing strength not only removes the need to pin under the workpiece to prevent slumping, but its revolutionary initial direct bond eliminates the need for double stick methods. Pinkgrip can be used inside and outside and adheres to just about every building substrate.
Application
All surfaces need to be sealed, sound, clean, dry and totally dust free. Cut the tip of the cratridge taking care not to damage the thread and apply the nozzle and an angle of 45 degrees. Apply using a standard sealant gun.
Direct bond: Apply a 6mm bead in a zig zag along the length of the item to be fixed. For panels and centre beads at 350mm max, press into place and apply an even pressure onto the entire surface. Leave to cure for 24 to 48 hours. For extremely heavy items, provide temporary support whilst curing. Where gap filling is necessary, for example battens against an uneven wall, mark the areas where there is a larger gap and apply a thicker bead in these areas.
Double stick: Apply adhesive as above. Immediately press firmly into position to ensure adequate transfer of the adhesive and then pull away to affect the adhesive transfer. Allow adhesive to dry apart for 5 minutes before pressing finally into position. Allow to dry for 24 hours before subjecting to traffic.
Storage
Store in original unopened containers between 5 and 25 degrees celsius but do not sotre above 30 degrees celsius. Store as flammable goods.
Shelf life
12 months from date of manufacture in unopened containers.
Direct bond: Apply a 6mm bead in a zig zag along the length of the item to be fixed. For panels and centre beads at 350mm max, press into place and apply an even pressure onto the entire surface. Leave to cure for 24 to 48 hours. For extremely heavy items, provide temporary support whilst curing. Where gap filling is necessary, for example battens against an uneven wall, mark the areas where there is a larger gap and apply a thicker bead in these areas.
Double stick: Apply adhesive as above. Immediately press firmly into position to ensure adequate transfer of the adhesive and then pull away to affect the adhesive transfer. Allow adhesive to dry apart for 5 minutes before pressing finally into position. Allow to dry for 24 hours before subjecting to traffic.
Storage
Store in original unopened containers between 5 and 25 degrees celsius but do not sotre above 30 degrees celsius. Store as flammable goods.
Shelf life
12 months from date of manufacture in unopened containers.
Please note: Tools and excess adhesive can be cleaned using white spirits or turpentine substitute.
There are no product specifications to show.
There are currently no questions for this product.
Pay in 4 interest-free payments of £0.5325
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
