Consisting of 9" uncured FormFlash factory laminated to QuickSeam Tape, this QuickSeam FormFlash from Firestone has been created with a strip to flash multiple applications including penetrations (such as inlet/outlet pipes), pipes and inside and outside corners. When applying ...Read More
Consisting of 9" uncured FormFlash factory laminated to QuickSeam Tape, this QuickSeam FormFlash from Firestone has been created with a strip to flash multiple applications including penetrations (such as inlet/outlet pipes), pipes and inside and outside corners.
When applying this FormFlash, use a QuickScrubber or QuickScrubber Plus pan and handle and QuickPrime Plus to clean and prime mating surfaces. During cloudy conditions below 15°C, use heat guns without ignition sources to heat this QuickSeam FormFlash and ensure great formability to the primed substrate. On sunny days below 21°C, place this QuickSeam FormFlash, prior to applying, with the flashing side up to enable it to warm up and ensure good formability. On sunny days above 21°C, lay this QuickSeam FormFlash out before application with the release paper up to inhibit too much heat gain and ensure excellent formability.
There are no product specifications to show.
There are no product downloads to show.
There are currently no questions for this product.
Pay in 4 interest-free payments of £82.9175025
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
