Graf One2Clean Plus Sewage Treatment Plant
Product Description
The One2Clean Plus sewage treatment plant from Graf will treat the water, so that it is clean enough to be discharged into a water course (depending on how frequently it is being used and the manufacturer’s guidelines). However, One2Clean Plus sewage treatment plants do require a power source and requires emptying approximately every year.
The water discharged from the One2Clean Plus packaged treatment plant must meet the relevant British Standard which is BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields.
Graf One2Clean Plus Sewage Treatment Plant Process
- Untreated waste enters the One2Clean tank via the inlet on the side.
- Wastewater then falls directly into the biological zone where the treatment takes place, allowing micro-organisms to start the breakdown process.
- Compressed air is used initially for aeration through the diffuser, intermittent to achieve the best treatment performance.
- Aeration is then stopped allowing the activated waste to sink to the bottom.
- Compressed air is sent through the One2Clean tank once again, extracting the cleaned water near the surface.
- This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent.
- The above process occurs twice per day, each lasting 12 hours.
- The sludge which builds up at the bottom of the tank must also be emptied in line with the manufacturer’s instructions
- Numerous companiescan dispose of the waste, these must be a registered waste carrier
Features & Benefits
- One tank with just one chamber
- Less energy consumption
- No mechanical elements in the wastewater
- No pumps in the wastewater
- No electrical components in the wastewater
- Incredibly low volume of sewage sludge
- Odourless, clear treated water for extraction
- State-of-the-art manufacturing for maximum stability
- 100% watertight and corrosion-resistant
- Can be installed in groundwater
- Simple maintenance via an integrated, self-cleaning sampling container
- More advanced control panel than the standard One2Clean
- Control panel allows additional plug in retro fitting of add on systems
Product Documents
There are no product downloads to show.
Specifications
Details
B125 Population 5 Person
7 Person
9 Person
10 Person
14 Person
18 Person
Products We Recommend
Questions & Answers
Question:
Does this ship as kit of parts rather than fully assembled (good if it is a kit) and does it have the ability to accommodate reduced flow in the case use in a holiday home complex.
Answer:
This gets delivered fully assembled ready to go into the ground. It can fluctuate the capacity of effluent as needed
Product Enquiry Form
Graf One2Clean Plus Sewage Treatment Plant
|
"Good communication" Roger Clark |
|
"Goods received a lot sooner than…" olivier |
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
View finance options
»
* Subject to status. Minimum spend required. T&Cs apply.
A smarter way to buy building materials.
Sign up today for a cash or credit account and exclusive discounts with a CMO Trade Account
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.