The Ecolite 100% recycled plastic duct access chamber system has been designed to be a quick-build alternative to traditional concrete or brick built access chambers. Each 150mm deep ring can be simply stacked on top of each other to the required depth to complete a totally load bearing chamber.
Designed for use in both footway and carriageway applications the Ecolite system has been tested to BSEN124 B125 & D400 loadings. The twin wall design incorporates internal support ribs which gives the finished chamber its inherent strength and also means that chambers do not require a concrete surround for support, for most applications.
There are no product downloads to show.
Question:
Are these or can these be made water resistant to avoid the chamber filling with water?
Answer:
These chambers are water resistant to a certain extent. This all depends on the installation of the chambers, the depth and the cover that you use with it.
Question:
What is the lid that covers the top ?
Answer:
You would need any 1200 x 900mm manhole cover.
Question:
Hi are these fibre glass
Answer:
They are made out of Recycled Polypropylene.
Question:
Hi what depth can these access chambers be used to?
Answer:
This would depend on what weight is needing to go over them.
Question:
Please confirm that the Ecolite Duct Access Chamber would be compatible with Clark Manhole Cover CD 752 KMB in terms of fit.
Answer:
Yes this would be suitable
Question:
What is the maximum depth the following product can be used for without reinforcement?
Answer:
This can go to 2 metres depth. If you need to go deeper, we would need to know what would be going over them.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.