This range of pedestals has been designed to give applicators much greater scope to set out the decking on areas with very large differences in deck level. Often contractors are not sure exactly by how much and where the fall on the roof will be exactly, and it can be frustrat...Read More
This range of pedestals has been designed to give applicators much greater scope to set out the decking on areas with very large differences in deck level. Often contractors are not sure exactly by how much and where the fall on the roof will be exactly, and it can be frustrating when a slightly incorrect height of TD unit has been purchased.
By using the TD EXTRA range contractors have greater flexibility in setting out the correct height 85mm right up to 380mm by ordering only three different sized units. This gives contractors greater flexibility and makes estimating much easier, avoiding delays in exchanging stock.
These pedestals have the heights marked out every 10mm on the side of stems, so users can see at a glance the exact height they are adjusting to without having to constantly re-measure.
Each TD EXTRA pad comes complete with an extension shank. This shank clicks into the baseplate and the threaded stem is placed into the top of it.
Height: 125mm to 210mm
Diameter of head: 120mm
Diameter of base: 200mm
Distance between lugs: 60mm
Side bar height: 30mm
Weight tolerance: 683kg
Weight Tolerance: Maximum Load 11,493 N = 1,171kg
End of Linear Behaviour at: 6,700N = 683kg
Temperature tolerance: -40°C to +75°C
There are currently no questions for this product.
Pay in 4 interest-free payments of £1.13
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
