Marshalls CPM precast concrete bends are manufactured by cutting pipes into two or three segments and joining them together at the required angle using an epoxy resin. Bends may not necessarily have the same load-bearing capacity as the pipes with which they are to be laid. It ...Read More
Marshalls CPM precast concrete bends are manufactured by cutting pipes into two or three segments and joining them together at the required angle using an epoxy resin.
Bends may not necessarily have the same load-bearing capacity as the pipes with which they are to be laid. It is therefore recommended that they should be surrounded by suitably designed in-situ concrete where significant load conditions have to be met, or where anchorage of the pipeline is required. Bends have the same manufactured internal diameter and wall thickness as the pipes with which they are to be laid.
DN: 825mm
Angle: 90dg
Total Effective Length: 1750mm
Please note: The use of CPM lubricant is strongly recommended with the CPM integral jointed pipe system. Non-compliance may result in installation problems for which CPM can accept no responsibility. If we are called to site for pipe jointing issues and it is found that CPM lubricant has not been used, then there will be a charge of £150 to cover CPM costs
There are no product downloads to show.
There are currently no questions for this product.
Pay in 4 interest-free payments of £543.05249
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
